Carrier Aqua Comfort Monobloc Air to Water Heat Pump

One-Stop Solution - Heating, Cooling and Domestic Hot Water in One System

Aqua Comfort is an integrated system that provides space heating and cooling as well as domestic hot water, offering a complete, all-year-round solution which can remove the need for traditional gas or oil boilers, or work together with them. Aqua Comfort can be combined with floor heating loops, fan coil units, radiators and domestic water tank. It can also be connected to solar collectors, gas furnace, boiler and other heat sources.

Weather Temperature Curve

With the help of weather temperature curve function, water temperature will automatically change as outside air temperature changes. When outdoor air temperature increases/decreases, the heating load will decrease/ increase and water temperature will decrease/increase automatically. When outdoor air temperature decreases/increases, the cooling load will decrease/increase and water temperature will increase/decrease automatically. Totally 32 fixed weather temperature curve and one custom curve is available, which meets the diversified requirements of temperature.

Cascade System

Cascade system design is perfect when an extension of capacity becomes required as the building cooling/ heating demand evolves. Maximum 6 units can be controlled in group with one controller. Balance tank temperature control makes water temperature more accurate. Water tank can only be connected to the master unit water circuit through a three-way valve, and controlled by the master unit. AHS can only be connected to the master waterway and controlled by the master unit.

Double Zones Control

Double zones control is only available for heating mode. It can control different areas to reach different temperature to meet various needs of daily use.

1. Using wired controller only Wired controller sets the mode, temperature and on/off. Zone 1 is controlled based on the leaving water temperature. Zone 2 is controlled based on the leaving water temperature or built-in sensor integrated in the wired controller.

2. Using wired controller and thermostat Wired controller sets the mode and water temperature. Both Zone 1 and Zone 2 are controlled by thermostat.